光学和高速IO解决方案

This optical transceiver comes with a maximum link length of 100m on OM4 multimode fiber, and is capable of a 400Gb/s data rate with each channel transmitting up to 53.125Gb/s. The module also features outstanding BER and high sensitivity because of reliable design and excellent coupling efficiency. It is compliant with IEEE 802.3cm, QSFP DD CIMS 4.0 and QSFP DD Hardware 5.1. These 400Gb/s QSFP DD SR8 high-speed optical transceivers find applications in cloud computing, Big Data and other technologies associated with the construction of data centers.

Amphenol 100G QSFP28 transceivers include SR4,CWDM4, LR4 and ER4 lite, adopt MPO or LC interface and compatible with IEEE802.3bm, SFF-8636 and other standards.They have the characteristics of low power consumption, small size and high speed, and is beneficial to increasing the capacity of the data center, improve the port density and reduce the power consumption. It is widely applied in large data center, 100G Ethernet, ITU-T OTU4 and other environments.

The module is compliant with IEEE 802.3 cd, SFF-8472 Rev 12.4, and compatible with SFF-8432 and applicable portions of SFF-8431 Rev. 4.1.

The module is compatible with IEEE 802.3 cd 50G SR. Maximum link length of 70m on OM3 multimode fiber or 100m on OM4 multimode fiber.

The module is Compatible with 64G FC-PI-7.

Amphenol 25G SFP28 optical transceiver includes SR, LR Lite, LR, ER, etc, adopt LC interface and compatible with IEEE802.3by, IEEE802.3cc, SFF-8472 and other standards. They have the characteristics of low power consumption, high speed and high reliability. These products are mainly applied in 25G Ethernet, CPRI10 and other environments.

Amphenol's 300Gb/s Leap® High-Speed Optical Module is faster, smaller, and more cost and power efficient than most conventional datacenter interconnects.

The rugged SCFF ("Small Cubical Form Factor) is a 1-channel duplex multi-mode (850nm) on-board transceiver with a 12pin electrical interface (SMT) complying specification SFF-8431 for high speed interfaces.

An optical transceiver is a single unit with the functionality of both a transmitter and receiver. Through fiber optic technology, in the form of pulses of light, optical transceivers convert the electrical signal from a switch or router to an optical signal that can be transmitted and received. This is done at very high speeds, across long distances. It can be plugged into or embedded into another device within a data network that can send and receive a signal.

Amphenol's 100G QSFP28 to QSFP28 Active Optical Cable assemblies are a reliable, cost and power efficient, integrated solution which is ideal for high density signal transmission typically seen in most storage, data centers and high performance computing applications with fiber cable length up to 100meters.

Amphenol's QSFP DD to QSFP DD 400G Active Optical Cable (AOC) assemblies doubles both the number of lanes from 4 to 8 and the bits sent per unit interval as compared to 100G QSFP28 AOC.

Amphenol QSFP DD to QSFP DD 200G Active Optical Cable assemblies increase the number of lanes from 4 to 8 and double the port density as compared to 100G QSFP28 AOC. The QSFP DD AOCs operate up to 25Gb/s NRZ modulation and provide solutions up to 200Gb/s aggregate bandwidth, supporting 100meters over parallel multimode fiber. They are an ideal choice to be adopted for higher capacity networks and data center applications.

Amphenol's Mini-SAS HD Active Optical Cable is fully compliant to SAS 2.1 and SAS 3.0 industry standards as well as the SFF-8636 interface standard. Used primarily for external Enterprise storage applications (box-to-box, server to storage, server to switch), this cable is part of Amphenol's comprehensive Mini-SAS HD product offerings that address all board connector and cabling applications, from 1 to 100 meters. This wide offering gives system architects full flexibility and a complete range of products to meet all high speed storage and high density IO system needs.

Amphenol's 300G CXP2 to CXP2 Active Optical Cable is a natural choice for optical cabling in data center / high performance computing hardware applications, providing a cost effective plug and play cabling solution. The CXP2 form factor delivers the highest hardware faceplate port density among existing SFF industry standards.

Amphenol is a leading innovator in the development and manufacturing of Active Optical Cables. With our global design teams, world class manufacturing and testing capabilities and cost effectiveness, Amphenol leads the way in high speed optical products. Whether industry standard or application specific designs are required, Amphenol provides customers with products that enable performance at the leading edge of next generation interconnect. We offer a complete portfolio of high speed IO products for all of your needs. Our Active Optical Products are designed for a wide range of applications, including data centers, HPC, telecom, and server and storage systems. We support Ethernet, Fibre Channel, Infiband, SAS, PCIe, and CPRI with data rates ranging from 12G to 400G.

Near ASIC to External High Speed IO receptacles

Amphenol's ExtremePort™ QSFP+ interconnect system is comprised of a 38-position, 0.8mm pitch connector built for use in high speed serial applications. Each port offers 4 channels to increase port density which allows for more board real estate and cost optimized solutions.

Amphenol's ExtremePort™ QSFP 112G interconnect system is comprised of a 38-position, 0.8mm pitch connector built for use in high speed serial applications.

Amphenol's QSFP28/56/112G cable assembly is designed to meet data center, networking and high performance computing application needs for high density cabling interconnect systems capable of 28Gb/s to 112Gb/s per channel transmission rates. Designed to meet the requirements of Small Form Factor industry standard SFF-8665, Amphenol offers passive cable assemblies tailored to meet specific cable lengths while meeting all performance requirements.

Amphenol's QSFP28/56G Loopback Modules are part of our comprehensive QSFP28/56G product family which includes copper cables, active optical cables, and connectors. These QSFP28/56G loopbacks are offered as passive electrical with multiple attenuation and thermal consumption levels. QSFP28/56G loopbacks are designed to support data speeds up to 100G/200G (4 lanes at 25G/50G).

Amphenol's ExtremePort™ QSFP DD 112G interconnect system is comprised of a 76 position, 0.8mm pitch connector built for use in high-speed serial applications. Each port supports up to 800Gb/s in aggregate over an 8 x 112Gb/s electrical interface. The cage and connector design provides backwards compatibility to QSFP56 modules which can be inserted into a QSFP DD port and connected to 4 of the 8 electrical channels. It is one of the industry's leading multi-lane pluggable form factors used across Ethernet, Fibre Channel and InfiniBand.

Amphenol's QSFP DD (Double Density) passive copper cable assemblies originally doubled the number of 25G/lane NRZ channels from 4 to 8 lanes when compared to the existing 100G QSFP cabling systems enabling 200Gb/s data rates. The next-gen QSFP DD cables now enable 400G and 800G in application lengths from 0.5 meter up to and including 3 meters.

Amphenol's QSFP DD (Double-Density) Loopback Modules are part of our comprehensive QSFP DD product family offering - cables, connectors and AOC's. These QSFP DD loopback cable assemblies are offered in four configurations – Passive Electrical, Passive Thermal, Active Electrical, Active Thermal. All loopback cable assemblies are backwards plug compatible with existing 100G based systems and support 200G (8 lanes @ 25G NRZ) or 400G (8 lanes @ 50G PAM4) signaling transmission.

Amphenol's ExtremePort™ OSFP 112G interconnect system is comprised of a 60 position, 0.60mm pitch connector designed for high-speed serial applications. Each port supports up to 800Gb/s in aggregate over an 8 x 112Gb/s electrical interface.

Amphenol's OSFP interconnect system has 60 contacts per port, with a 0.6mm contact pitch and 8 high speed channels. The OSFP footprint is optimized for signal integrity performance and built for use in high speed serial applications. The connector is enhanced for low crosstalk and has ground commoning for resonance dampening. It is also designed for 1U applications. An integrated heat sink is featured on the module side for optimal thermal performance.

Amphenol is leading the industry in OSFP cable development. Our Electronics Products 'Product of the Year' award-winning OSFP (Octal Small Form Factor Pluggable) cable assemblies are compatible with 25G/lane channel NRZ up to 112G/lane channel PAM4 signaling protocols that allow the cables to deliver aggregate bandwidths of 200G, 400G, and 800G per cable assembly.

Amphenol's OSFP (Octal SFP) Loopback Modules are part of our OSFP I/O system product family that includes copper cables, connectors and AOC's. These OSFP loopback cable assemblies are offered in four configurations – Passive Electrical, Passive Thermal, Active Electrical, Active Thermal. The OSFP loopback units include integrated heat sinks that are a key part of the heat dissipative properties of the OSFP interconnect system. All loopback cable assemblies support 200G (8 lanes @ 25G NRZ) or 400G (8 lanes @ 50G PAM4) signaling transmission.

Amphenol's ExtremePort™ SFP112G interconnect system is comprised of a 20-position hot swappable I/O connector enclosed in a metal cage mounted to a host PCB.

TR Multicoax delivers superior signal integrity from multiple high speed analog or digital channels. With a choice of 20GHz, 40GHz, or 70GHz configurations, users can upgrade their connectors according to bandwidth requirements on their application. TR is the highest density, high speed multicoax connector on the market. The interface is compression mount which drives lower total cost of testing by avoiding costly solder-down components that cannot be recovered and encouraging reuse across programs.

Coming Soon

Amphenol is a technology leader in the design, manufacture, and supply of high-performance copper cable assemblies. Our global footprint and track record is unparalleled in the industry, with a customer base that includes all major data center, networking, HPC, telecom, server and storage system platform providers. With our design creativity, simulation and testing capability, and cost effectiveness, Amphenol leads the way in cabling systems development for internet equipment, infrastructure and enterprise networks. Whether industry standard or application-specific designs are required, Amphenol provides customers with products that enable performance at the leading edge of next-generation, high-speed technology.